You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5351 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Wednesday, April 21st 2004, 3:58am

by dre

I do have a 6 station with only 5 stations hooked up but the problem is whoever installed the system ran the 5th zone all the way around the back yard to get to the other side of my driveway which is over 300 feet long. The system was good until I started installing heads to fix the dry spots the original system was missing. I think a pump will increase the spray pattern and also save on trenching all the way back to the original sprinkler line.

Tuesday, April 20th 2004, 5:33pm

by FixItDaddy

I assume the other 4 stations are working ok. You didnt say how much flow/pressure you have or what kind of heads are on the 6th station. 12 heads sounds like a lot of heads for a single zone. It seems that the flow and pressure you need exceed the available flow and pressure. The easiest fix could be to simply change the spray nozzles to lower flow nozzles if possible. If not, then I would consider dividing that station into two 6 head stations. Im guessing you have a 6 station controller, so no change there. Splitting it into two stations should be easier than trying to add a pump for a single station. Hope this helps...

Tuesday, April 20th 2004, 6:56am

by dre

pressure problem

I have an existing rainbird 5 station sprinkler system and the last zone has 12 heads on it. I want to put an irrigation pump on just the last zone for spray pattern increase as well as pressure problems. Is there a certain pump to use and is is difficult?