You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4119 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, May 12th 2003, 12:43pm

by Rays Sprinklers

If you can take it in, around here backflows cost about60.00 so its a good idea to take it inside


Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers

Friday, April 25th 2003, 5:09pm

by aljohnson1

The best answer is to remove during the winter. Most backflow manufacturers do not recomment blowing throught a backflow preventer. Even if you do you will not likely get all the water out. Make up a piece of pipe to replace the backflow with in the winter and take it inside. $20 will make up a pipe and it will cost $350 to replace so it is a good investment.


Tuesday, November 5th 2002, 3:24am

by js

Winterizing Febco backflow device

Should the backflow device be removed during the winter? The company that installed my system and "blows it out" does not remove the device because they say the pipes would move during the winter and they would not be able to re-install it in the spring. Each spring when the system gets turned back on, one (or more) of the test cocks leak due to cracks developing during the winter, due to water left in the device. Is there anything I can do to winterize the backflow device and protect it during the winter? Thanks.