You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 10 posts

Tuesday, September 3rd 2013, 9:23pm

by hi.todd

I totally agree.

Tuesday, September 3rd 2013, 4:44pm

by Wet_Boots

I'm not a fan of the blue nozzles. I don't have a lot of experience with them though. The first time I tried them it looked like to me there was more puddling around the head so I switched them out to the red nozzle and I've been using only red ever since.
It seems that visible close-in spray is the point of these nozzles, even when it's unnecessary or harmful.

The one thing I am grateful for the RB 5000 series is that they can spray further than a PGP can at some lower pressures and nozzle sizes, which became important when the high-pop PGP was discontinued in favor of the 'Ultra' version of the head, which can't use the original red nozzles.

Tuesday, September 3rd 2013, 2:20pm

by mrfixit

Sometimes the adjusting screw on maxi paws unscrew themselves. Wrapping it in teflon tape seems to keep them in place.

I know it's not ideal especially if you're going to use the bleeder screw but maybe teflon tape on the bleeder screw would keep it from coming off.

Monday, September 2nd 2013, 4:41pm

by hi.todd

I was using the DV-100s, they had a problem that is still popping up. The bleed screws or thumb screws were slowly backing out causing a lot of warranty calls on new systems.

I don't install that many new systems, but it still caused me pain in the schedule.

:thumbsup:

Sunday, September 1st 2013, 7:50pm

by Wet_Boots

I made the switch to the Hunter Valve this year after the Fiasco of valve problems with Rainbird last year.
Which RB valves were you using?

Sunday, September 1st 2013, 5:37pm

by hi.todd

I think Hunter only did it to say their nozzles are listed in order of G.P.M. like the Rainbird 5000

I just like the Rainbird 5000.

I used to be a PGP guy.

I have converted to almost all hunter except for the Rainbird Spray Nozzle and the 5000 Rotor.

I made the switch to the Hunter Valve this year after the Fiasco of valve problems with Rainbird last year.

Friday, August 30th 2013, 1:07am

by mrfixit

I'm not a fan of the blue nozzles. I don't have a lot of experience with them though. The first time I tried them it looked like to me there was more puddling around the head so I switched them out to the red nozzle and I've been using only red ever since.

Thursday, August 29th 2013, 11:45am

by Tripp Knightly (Guest)

Well, I had one Maxi that needed replacement (return trip failed and the only way out was to replace at least the body). I'd seen enough posts suggesting Maxi is decades-old technology (even if they work fine... not trying to kindle that debate anew here). So, I figured why not try something new and since it's a 2-head zone replaced both and kept one as a parts cannibal.

Wednesday, August 28th 2013, 7:43am

by Wet_Boots

why aren't you just shortening the radius of the maxipaws, if that's the only issue?

Tuesday, August 27th 2013, 7:28pm

by TrippKnightly (Guest)

Hunter PGP Blue Nozzles... there's like no difference vs red?

I'm a little dumbfounded here. And maybe you'll disagree with me. Seems that the blue nozzles are so unappreciably different in pattern vs the red. Why on earth would Hunter even bother inventing and deploying them?



For me it doesn't matter much as I only have 2 PGP ATRs on 1 zone (rest Rainbird Maxi-Paw for now), but still seems really odd the blue nozzles even exist. Thought they'd give me some kind of new versatility or way to shorten the throw vs the red using the diffuser, but seems like nope just a different color. Heck I don't even see a gimmicky/pretty curtain of rain!



(Aside: my problem w/ the Maxis is they throw too far (I didn't design my system) so that's why I was interested in being able to dial back the throw. Will have to see if I can do that @ the Irritrol valve and still have the things work right.)