You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1914 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, July 21st 2013, 11:11am

by mrfixit

I ran across a 2" PEB a couple years ago that had a sever weep. More of a leak.
It turns out the valve body was cracked between the port threads and the seat.
Whoever installed the valves had used pipe dope instead of teflon tape. This may have cracked the valve.
This complex has had many valves crack since then. Some cracks are on the seat. All Rainbird PEB's.
Look for hairline cracks. Using a flashlight helps me see them.

Sunday, July 21st 2013, 9:50am

by nartox

Rainbird PEB valves weeping

I have a couple of Rainbird PEB 150 and 200 that are weeping. I have topped out the valves with all new parts after checking for cracks and other possible problems with the base of the valve. After turning the water back on, the valves are still weeping and one of them is even worse. In the past I have just cut out the bad valves and installed new ones. What help is there for me?