You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1798 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Tuesday, July 16th 2013, 3:18pm

by Wet_Boots

You might be looking at an original-model 217 valve. Those had a flat black rubber diaphragm that extended to a wee bit beyond the edge of the cover and body. The cover screws went through the diaphragm. Make sure you have the correct replacement part, since the current production of that valve is named 217B, and its diaphragm is different than the original, and won't work as a replacement.

Tuesday, July 16th 2013, 2:40pm

by Mervin

Have had the top off but cannot figure out how to remove the diaphragm

Tuesday, July 16th 2013, 2:08pm

by mrfixit

You're on the right track. Take the top off.

Tuesday, July 16th 2013, 1:03pm

by Mervin

Richdel Model 217PR Solenoid

I am trying to find information on a Model 217PR Richdel (hope if have it right) solenoid valve. Can not figure out how to tear it apart other than removing the top.