You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 419 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Thursday, June 27th 2013, 6:22am

by Wet_Boots

The poppet for the 800M4FR has an internal "freeze bypass" that is supposed to let water pass through in in freeze conditions, and it could allow a continuous flow, once it first opens.

Wednesday, June 26th 2013, 7:22pm

by benp84

I'm not sure if the water pressure is right. It appears to be working properly, but I suppose it might be a bit low.

The problem I see with the partially-open valve theory is that the PVB still leaks even when the sprinklers are off. My physics background leads me to think that the pressure in the PVB would equal the pressure from the main water source if the water isn't flowing, as long as the valves are at least partially open. Does that sound right?

It's hard to imagine how freeze damage could cause a leak between brand new parts, so I think your faulty part theory sounds most likely to me. Maybe I'll try parts from another vendor and if that doesn't work, hire a pro.

Thanks for your input. It's helpful to know that I wasn't missing something obvious!

Tuesday, June 25th 2013, 10:16pm

by mrfixit

I can't say I've seen one do what your video's showing after being repaired so I'm grasping at straws here.
Since you have the same issue even after installing new parts I'm thinking maybe the issue is elsewhere.
Has there been a drop in water pressure?
Do the sprinklers have full pressure?
I've seen ball valves break where it looks like they're open because the handle is inline with the pipe but the ball inside only partially opened.
Is there a pressure regulator on the system?
Is there another shut off valve that's not on all the way?
Maybe you bought faulty parts.

Maybe the thing froze and is irrepairable.
That's all I have.

Tuesday, June 25th 2013, 9:18pm

by benp84

Did you use all the replacement parts? Including the large O-ring? Is this still the original cover/bonnet?
Yep, all of them. Large O-ring, bonnet and cover included.

Tuesday, June 25th 2013, 5:17pm

by Wet_Boots

Did you use all the replacement parts? Including the large O-ring? Is this still the original cover/bonnet?

Tuesday, June 25th 2013, 3:41pm

by benp84

Leaking PVB

I have a Watts 800M4FR pressure vacuum breaker. When I turned it on this year it started leaking from the top, apparently between the vent float and the bonnet. Information I found online suggested that I replace the faulty parts, so I did. In fact, I bought the full replacement kit and replaced every part in it, but it still continued leaking between the NEW vent float and bonnet.

I rebuilt it two more times, even tried using the sealant paste that the parts come with between the vent float and bonnet, but it still leaks. Here's a video: http://www.youtube.com/watch?v=O-wfL-JYRWw Any ideas? Thanks.