You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 394 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Tuesday, June 25th 2013, 8:32pm

by mrfixit

If there's not a problem with the controller then the valve needs repair.
You should have a flow control on that drip zone.
If I was you I'd buy a valve with the flow control and swap out all the parts with your valve.
Flow control valve
Having a flow control will help the valve shut off especially on a drip zone.

Tuesday, June 25th 2013, 1:54pm

by BessMan94

Zone 2 is now Zone 12

Thanks for the response. This just started not long along. The system is at least two years old. I haven't turned anything off. The valve is a RainBird 100-DV 1" No Flo Valve. And now station 12 is in constant on mode. Thank goodness its a drip hose.

Monday, June 24th 2013, 11:22pm

by mrfixit

It sounds like the wiring's messed up. Maybe zone 12 is connected to the number 2 and the number 12 wire.
--
I'm thinking you didn't open the bleeder screw far enough. Turn it farther. Even take it out if you have to. If the valve still doesn't come on then there's a problem at the valve. Is the flow control turned off?
--
What's the model valve?

Monday, June 24th 2013, 8:45pm

by BessMan94

RainBird ESP Modular Controller - Zone 2 is now zone 12?

I go out and notice the grass in zone 2 is browning so I check it. Turn it on at the controller, nothing; turn it on at the valve by turning bleeder, nothing; let timer run and notice zone 12 is on. So zone 12 comes on when zone 2 should come on and zone 12 comes on when zone 12 should. HELP? :S