You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2047 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Sunday, June 9th 2013, 4:51pm

by wetlobo

do you have master valve on the system

Wednesday, June 5th 2013, 7:17pm

by mrfixit

Also make sure the controller isn't running off the back up battery only. Take the battery out for a few minutes. Is the display gone now?
Is the outlet working?
Is there power from the transformer?
Yep could be a broken common wire.

Wednesday, June 5th 2013, 4:09pm

by Wet_Boots

Check the electrical health of the wiring with some resistance testing.

Wednesday, June 5th 2013, 3:53pm

by aadave1

Troubleshooting a hunter Pro-C

I have a Hunter PRO-C that has worked for years. Now it shows that stations are watering but, no water is coming out of the heads. If I manually actuate the valves they work so, I know it's got water. For whatever reason, the controler isn't sending the signal to open the valves. I have tried re-setting the whole system and reprogramed the PRO-C. I have also by-passed the rain sensor. Any ideas as to why it's not working? ?(