You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1599 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Monday, May 6th 2013, 9:47am

by Wet_Boots

capping off heads = good idea

Monday, May 6th 2013, 9:17am

by jjbrannan

Locate a broken irrigation line

I recently removed several trees from my backyard and ground 2 stumps. When I turned on a manual test of the zone all 6 rainbird heads popped and a light spray came from all heads. When I checked the pressure at the pump it was outputting 20-25psi. Normally, the output is between 40-50psi for this zone. I know I have a leak somewhere but locating it is a problem. Running the zone then looking for a puddle area leaves me with a wet backyard and no telltale puddle/bubble area. I ran the zone for about 10 minutes. Should I cap off all the rainbird heads and run the zone? Any recommendations?