You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 538 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Saturday, May 4th 2013, 4:54pm

by Scott76

Water pressure holds them up when it's flowing, but the internal spring is what drives them down after the flow stops. Take the heads apart and check the spring and internal stem for dirt and debris. Also check the inside of the bottom of the body for rocks or dirt that might be holding them up.

Friday, May 3rd 2013, 1:05pm

by Ianjanson

I should also mention that I just put the sprinklers in and the 3 stay up just about a 1/4 to 1/2 inch after running sprinklers at times. It seems odd that they would have grit already. Could it be a water pressure issue?

Friday, May 3rd 2013, 9:23am

by Ianjanson

The are slightly above grade. If they are binding, what should I do?

Friday, May 3rd 2013, 9:10am

by Wet_Boots

Maybe they're binding at the point where the nozzle attaches. Are the heads at or slightly above grade? (no dirt or sand at the seal, to cause binding)

Friday, May 3rd 2013, 8:34am

by Ianjanson

New Rain Bird 1800s not retracting all the way

I have 3 new Rain Bird 1804's that stay up about a 1/2 inch after each use. Does anybody know why this is happening?