You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1906 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Wednesday, April 3rd 2013, 5:08pm

by Wet_Boots

If you have antisyphon valves (that's plural, as in one for each zone) then you should employ the flow controls to adjust pressures in each zone.

Wednesday, April 3rd 2013, 12:56pm

by Vin123

I use anti-siphon valve and there is no backflow
preventer for the sprinkler system.

Tuesday, April 2nd 2013, 8:16pm

by Wet_Boots

Where's the backflow preventer for the sprinkler system?

Tuesday, April 2nd 2013, 6:00pm

by Vin123

Water Pressue Regulator

There is a water pressure regulator to home
fixture. But the water pressure to the irrigation

system is too high. I talked with two

plumbers but they gave me different solutions.

I need your advice. Thanks for the help

1. relocate the current water pressure regulator before the house shut off

2. Install another regulator after the irrigation shut off valve.