You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2133 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, March 17th 2013, 7:16pm

by Wet_Boots

Any pressure gauge has an accuracy error. Figure at least 3 percent of the highest number on the scale.

Sunday, March 17th 2013, 5:20pm

by pmsmith2032

PSI and GPM questions

I bought an Orbits pressure gauge at Menards and it is actually reading about 4 or 5 psi higher at the hose bib than the city said our static pressure is. I am assuming I should just use the lower one supplied by the city.I did the bucket test and came up with just over 10 gpm. However, if I use the calculator on irrigation tutorial I come up with 18 gpm (1" copper pipe). Not sure if the 5/8 water meter is affecting it.