You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 649 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, January 13th 2013, 3:51pm

by Wet_Boots

See if the system can be manually activated by way of the zone valves. That will allow you to see if the water is actually on and flowing. If you get the system running that way, then you can explore the possibility of an electrical fault in the system wiring, or a rain detector that has failed.

Sunday, January 13th 2013, 2:00pm

by Kpierce (Guest)

No stations come on

Hello,
I have a Kwikdial KD9. This was working fine in the fall, and I went to test this the other day and now no zones work.

I have tried running it by running each zone in manual mode, but no luck.

It blinks and counts down the minutes, but no water is coming out. I did replace the controller last summer because it kept showing the 'no battery' icon.

Is there something I can do to help diagnose the problem? I don't mind replacing the controller, but I would like to verify that is the problem prior to buying a new one.

Any advice is greatly appreciated.
Thanks
Kp