You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 623 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Sunday, November 11th 2012, 2:30pm

by Wet_Boots

HIT 220-050 looks like a copy of the Irritrol 217B valve, so they would make good replacements

Sunday, November 11th 2012, 1:07pm

by Little Rascal

It sounds like when of these valves malfunction, the best thing to do would be to replace the entire valve? What valve would be more reliable?

Sunday, November 11th 2012, 12:21pm

by Wet_Boots

HIT is a fringe brand name, with little pro installer history. If the entire system was installed with the one make and model of zone valve, you will become skilled at maintaining them, and you will start by having a spare valve on hand at all times, so you can do a complete swap of all parts, if needed.

Sunday, November 11th 2012, 7:11am

by Little Rascal

Help with valve - zone won't come on

Hi,

I have been assigned to take over our church's sprinkler system. The property is ten acres, so it's been quite a job. I have all the zones working except one. When I turn the valve on manually to that zone, I can hear water running, but no sprinkler heads pop up. When the controller turns on the valve, I also hear water, but same result...no heads pop up. I can't remember the brand of the valve right now. It has three letters and the numbers like 220-050. Any help would be appreciated.

I forgot to add that I know nothing about sprinkler systems...but am slowly learning.

I remember now, the brand is HIT 220-050.... maybe 250 or 215-050. I can go look at it again if it makes a difference.