You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 684 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Friday, November 2nd 2012, 9:17am

by Wet_Boots

Are you using all 9 zones?

Friday, November 2nd 2012, 8:07am

by polkashorty

Thanks for the tips. Looks like it's time for a new controller.

Monday, October 29th 2012, 12:20pm

by mrfixit

The controller sounds bad to me. You could try programming the B program and see if that works.
You asked for a simple solution. You could buy a new RainDial and swap out the faceplate.

Sunday, October 28th 2012, 9:54pm

by Wet_Boots

You should perform a reset of the controller, and program it from scratch.

Sunday, October 28th 2012, 12:15pm

by polkashorty

Irritrol Rain Dial Plus 9 won't shut off

When I slide my set program switch all the way over to OFF, my controller continues to run the programmed schedules as it does when set to the RUN position. The switch seems to operate normally when positioned in the SET program position, allowing for programming. I switch to the OFF position when rainy days are predicted and expect to have the unit not water when in this position. Now I have to unplug the unit and remove the battery backup to shut it down. Do I need to replace the entire unit or is there a more simple solution?