You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2344 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, August 18th 2012, 10:18am

by mrfixit

None of the valves work with the controller?
If so either the controller isn't working or there's a cut wire somewhere.
I suppose all of the diaphragms could be bad.
You do not want the bleeder screws leaking all of the time.

Friday, August 17th 2012, 8:32pm

by 7388 (Guest)

bleed valve

In order to get my sprinkler spraying, I have to turn the bleed valve on until the water shoots out of the bleed valve. Should I adjust the bleed valve, where there is no water coming out of the bleed valve, the sprinklers shut off. The water continues to flow after the timer is off (or after sprinklers shut down). The amount of water flowing out of the bleed valve is just too much. Please help!