You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2534 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 10 posts

Monday, August 20th 2007, 3:22am

by curcione

Thanks everyone for all your help.

Monday, August 20th 2007, 3:05am

by Lakeside

5004 is a 4inch pop up rotor and 5006 is a 6inch pop up. Stick with the 5004 if you have low pressure or the MPs. 5006 will need more pressure to make it all the way up!

Monday, August 20th 2007, 1:35am

by curcione

I just ran across a 5006 rotor head on eBay. What are the differences between the 5004 and the 5006 heads? Thanks.

Sunday, August 19th 2007, 4:33pm

by jmduke7

There is no difference in performance from the 5000 series to the 5000 plus series. The only difference is features (water shut off feature). Wet Boots is correct on the Maxi-Paw as being the performer in low pressure, but with all impacts, the need servicing over the years. There is a low pressure setting on the Maxi-Paw that can aid in the performance. You can change the spring on the splash arm from one location to another. This is usually only recommended on the smallest nozzle sizes, but have found that it does work in many other situations.

As far as a recommended replacement, the 5000 series rotor should Sufic. It comes with some low gallon nozzles that will aid in your low pressure situation.

Best of luck!

Sunday, August 19th 2007, 12:33pm

by curcione

From reading some of the other posts, in your opinion does the Rainbird 5000+ perform better than the 5000 series? Thanks.

Sunday, August 19th 2007, 12:30pm

by Wet_Boots

Nothing can outperform a Maxipaw at low pressure, so far as distance goes. But sometimes gear drive rotors with tiny nozzles can reduce the flow in a zone, and by doing so, raise its pressure (assuming the supply pressure is high enough) to a point where the heads can spray as far as the original maxi/mini heads were spraying at a lower pressure.

Sunday, August 19th 2007, 12:12pm

by curcione

The nozzels are the original ones from Lowes, but i have no idea which one's they are. <font color="blue">Do the Rainbird 5000 rotors fuction well with low water pressure?</font id="blue"> My Maxis pop up under low water pressure but stay in one position with no movement, not good. Thanks Wet_Boots.

Sunday, August 19th 2007, 7:09am

by Wet_Boots

What nozzles do you have in those heads? Minipaw nozzles are not interchangeable, but Maxipaw nozzles might be switched for smaller ones.

Sunday, August 19th 2007, 4:38am

by curcione

Thanks Lakeside for your feedback. Do the rotor heads perform better with lower water pressure? My max paws and mini Paws don't even pop up sometimes do to the low water pressure.

Sunday, August 19th 2007, 3:09am

by Lakeside

I personally like the 5000s better. Easy to adjust and troubleshoot if there are any issues.