You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 760 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Friday, July 20th 2012, 3:06pm

by mrfixit

I've seen this blinking about 6 times the past 2 years. I'm starting to wonder about the RainDial. Everytime it was the controller.
--
You could disconnect the wire from the problem valve and see if it still blinks.
--
You could try resetting the controller.
--
Make sure the faceplate's plugged in all the way. Open the panel and look for the grey color connector.
--
I doubt any of that will work.
---
The model number you gave us is an outdoor controller. If you don't want to fiddle with the wiring or anything, you could buy an indoor model, because it's cheaper, with the number of stations you need. 6,9 or 12. Take the faceplate out of the new controller and put it in the old controller.
It'll work...
--
Maybe you want a different model. Up to you. Controllers- Click Here

Friday, July 20th 2012, 9:05am

by nrwe

Here is a little more information. Model number RD600-EXT, Serial 366616. Input 120Vac, Output 24Vac.

The display now constantly blinks - thinking its definiately the controller - you agree? I tried listening for the valve. I couldn't tell because the water pipes thumping was pretty loud - hard to hear.

Thursday, July 19th 2012, 2:40pm

by mrfixit

I've seen this with the RainDial. It was the controller opening and closing the plunger of the solenoid. See if you can hear the solenoid clicking.
If that's the problem you'll need to change the faceplate or buy a new controller.

Thursday, July 19th 2012, 2:16pm

by GatorGuy

First thing, swap that zone wire with another.
See if the problem follows the wire.
If it does then it's not the controller, maybe wiring or solenoid.
If it does not follow the wire then controller problem.

Thursday, July 19th 2012, 1:57pm

by nrwe

Controller Issue? Not sure...

I have a Rain Dial controller - sorry, don't know the model. But I have one zone, and one zone only that rapidly turns on and off - it basically is acting like a pump. I need to know if this is a valve or controller issue. The funny thing is, is that if I manually turn on the zone - it works fine. Even works if I turn the bad zone plus another and it works. I have changed the schedule time, just to see if the scheduling works, and it works fine. But if I set this zone for 6am, I wake up hearing my water pipes thumping because this zone keeps on turning on and off and on and off and on, etc....

It's frustrating to say the least. Any ideas what the issue could be? I'm game to swap out the controller, never done it before, but what to make sure the controller is really the issue before I go to all that work.