You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2680 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Thursday, August 11th 2011, 6:35pm

by Wet_Boots

The basket settings are supposed to match the nozzle, in order to get the speeds correct.

Thursday, August 11th 2011, 5:25pm

by takeeley (Guest)

Optima UCR-1 adjustment

There is an adjustable white basket at the bottom of the inner workings. There is a reference mark on the basket, and on the white body just above the basket are corresponding stops. These stops are marked as bars with 1, 1.5, 2, 3, 4, and 6 bars. Do these control speed or gallons per minute? I have some new heads installed along with some old ones. All of the old ones sweep pretty slowly. Some ot the new ones sweep more normally, toward the slow speed, and some are super fast, swinging a 90 degree arc in just a couple of seconds.

Tuesday, September 16th 2008, 11:21am

by mrfixit

Sprinkler adjustment

I believe arc of this sprinkler adjusts the same as your UCR-1.

It's fairly easy. You need to adjust the sprinkler while the water is running. Turn on the sprinklers. Take that plastic ring off. Push down on the top and turn it all the way to the right. Put the ring back on. You should be in business.

Monday, September 15th 2008, 2:46pm

by peterdholden

Optima URC1 adjustments

I have an Optima URC1 with no directions. Does anyone know how to adjust it?


Monday, April 30th 2007, 6:40am

by bobJ

Optima UCR-1

I've bought three of these, over the years and they work fine, with a reach of over 40 feet except.....
How do you adjust the coverage to a 360' sweep. The vague directions are dismal, as to the effect, of what it says to do. "Pull the vandal ring down" and turn the head... So doesn't make it do what I want.
Are there any explicit directions online or has anyone here, experienced these?