You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2715 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Wednesday, August 10th 2011, 9:00am

by ReddHead

If the patio is coming out it may be a good time to throw in a couple of 2-3 inch PVC conduits. I'd bury them well below the level that the concrete will be and cap them. Also, I'd probably run two separate pipes as most towns will require separate conduit for water and electric (assuming you want low voltage electric at any point in the future). PVC is pretty cheap.

Friday, August 5th 2011, 3:39pm

by brookworld

Town Front lawn Sprinkler System

I am no means an expert . . .

when you redo your patio, you are asking whether it makes sense to lay pipe while the concrete is taken out ?

I am designing a system for my front landscape which is in 2 halves and found the biggest issues are (1) water supply, and (2) trenching. Everything else is just knowing what parts to use, and actually finding the parts.

First, do you know where is the water supply. The ideal case is to tap into your main house supply. Plus, you need backflow protection.

In my case, I really feel uncomfortable doing it myself if I don't know what I'm doing, the family doesn't get water until a plumber comes to fix the problem (next day & big $), or there is an unknown leak, or I can't get the compression fitting to stop leaking, etc. My plumber charged me $369 to swap out 2 older laundry valves in my brick basement (they were tight to the wall and with bad buck in getting them off, or unable to to solder properly, no family laundry until a plumber makes a house call, so paid to avoid the potential).

This usually has nothing to do with your patio. I intend to use the hose bib because my front lawn needs are modest and the plumbing rates are outrageous.

Second, you need to know where to put the sprinkler heads for the lawn; emitters for dripping are much easier as the 1/4" drip lines are can be pulled all over. You don't want to bury pipes under concrete, but need to pull pipes under walkways. etc. Thus, the other hard part is trenching 8-10" -- you go underneath concrete IF YOU CAN'T trench along the perimeter of concrete surfaces or can't reach where you want to go.

So, good question to ask about putting down pipe when redoing your patio. But it's not like drywall where you want to pull wire while the wall is down.

The other point is your townhouse location . . . I previously lived in Silicon Valley where we had no freezing temps and can use PVC with no consideration of winterization, but now (forced) to live in No. Virginia, have to use different materials because of harsh winters -- it seems infinitely different.

Monday, July 25th 2011, 11:27am

by wsommariva

Are you allowed to do this since it's a townhome and you will have a committee ready to stop you? As far as a small system, I installed a small one and I save considerable time not having to water every weekend. And it was "fun" to do, sort of, and very rewarding.

Thursday, July 21st 2011, 5:12pm

by Wet_Boots

For a really small system, you can supply it from a hose bib. Absent a diagram, it isn't clear why you want anything under the new concrete.

Thursday, July 21st 2011, 3:12pm

by grey

Read . Very good information. I don't think it's a good idea to bury piping under concrete. What if you will need to do some work on it later?
Supplying your sprinkler system from a hose bib is not recommended for a number of reasons. You will need to tap into your house main supply line.

Thursday, July 21st 2011, 2:57pm

by khargy

Small sprinkler system for townhouse.

I have a townhouse with a small front yard (maybe 200sq ft) but even so, I figure one day it would be nice to have a sprinkler system although I don't know much about the process. It would two zones at the max, one for the grass and then perhaps one for a drip system for the flowerbed.

In the next month or so I'm going to be replacing the front patio (approx 100sq ft). The contractor will be replacing everything and putting in a new slab and laid brick on top. I figure if I need to do something under the patio now would be the time. Can I just have some PVC installed under the patio with some Ts to where I would want the sprinkler heads? Anything else I would need? I have a hose big already out front so I could tie into that. Does it even make sense for a front yard this small?