You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 726 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 7 posts

Sunday, April 22nd 2012, 8:09pm

by turfdoctor (Guest)

Toro 570 4 inch pop up body stuck in up position

The wiper seal can sometimes be cleaned where soil accumulates in the groove at the top and inside the bore where the riser passes through the seal. Use a thin knife blade and carefully clear the accumulated soil from both areas under a stream of warm water. Worked for me.

Friday, July 29th 2011, 10:20am

by wsommariva

I blame my kids when the heads go out of position. I'll check out the Rain Birds. Thanks

Thursday, July 28th 2011, 8:39pm

by mike1059

toro 570 vs rain bird 1800

My personal preference is the rain bird 1800 series. Although all pop-up heads can develop sticking problems, another problem I have found with the 570 is it tends to turn when it rises so is constantly out of adjustment.

Thursday, July 28th 2011, 12:55pm

by wsommariva

Thank you. I'll see what happens when I clean it. Interesting that it get gets stuck since that spring is so hard to pull up when you need to pull it up.

Assuming the body is bad what brand spray body and heads are the "best" for homeowners?

Thursday, July 28th 2011, 12:32pm

by Wet_Boots

Any dirt at all gums things up - pros just change heads

There are some sites where all the (not many of them) 570 popups get changed out at one time, because they will all eventually fail to fully retract.

Thursday, July 28th 2011, 12:24pm

by seansy59

There might be just some dirt in there. Unscrew the top and flush the line out, and clean the riser with some water while gently pushing the seal cap up/down. If there is any debris in there, this will get it out. While your at it, you can clean the filer too.



If this doesn't work, then the best bet is to just replace the sprinkler as there cheap enough. Sometime dirt will ruin the riser with scrapes and rough areas, and make it stick constantly.

Thursday, July 28th 2011, 11:20am

by wsommariva

Toro 570 4 inch pop up body stuck in up position

Hi everyone.

For some reason one of my 4 inch pop up heads won't go all the way down when the zone turns off. Really no problem as it's in a flower bed against a wall. But still need to fix it. Any ideas?

Btw I changed a head on this last week while the water was on. Created a big puddle.