You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2547 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Sunday, July 3rd 2011, 10:16am

by Wet_Boots

It all depends on your skill set - another option is to replace the entire valve

There may be a point where you pick up the phone and hire it done

Sunday, July 3rd 2011, 7:46am

by dkverma

repairing valve seems to be tough job...

Sunday, July 3rd 2011, 7:27am

by Wet_Boots

probably a mechanical issue with the valves - easiest is to get a (same make and model) spare valve, and swap internal parts with the faulty one

Sunday, July 3rd 2011, 7:03am

by dkverma

Wiring or Solenoid Issue


I have 5 stations in my lawn. Out of 5, first 3 stations works fine. 4 station didn't turn on during its time and 5th station used to turn on for few seconds and then used to turn off. I thought Solenoid is bad and so I replaced solenoid for station 4 and 5. Now station 4 and 5 never turns off and so I have to control my water through main junction and turn it off from there. Station 1, 2 and 3 are working normal but station 4 and 5 keeps on along with other stations. Please advice where I did wrong.