You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 916 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 10 posts

Wednesday, March 14th 2012, 6:44pm

by mrfixit

Ok you're right. Funny how you know how it works without ever using it.

Wednesday, March 14th 2012, 12:09pm

by grey

I mean how good will it clean out soil, sand? Probably good enough for big pieces but what remains could easily clog up nozzle or get into rotor mechanism and then you have to do more work. I didn't use it though.

Tuesday, March 13th 2012, 11:32pm

by mrfixit

I've never used it to empty a valve box. I have a pump for that. This just sucks the water out of the line. When you have dirt down in a fitting where there used to be a sprinkler. You can draw the water and debris out the fitting without flushing it down the line clogging up other heads. The one manifold I did use it on to get some minimal debris out of was down in a box. It sure beat turning the water on, flooding the box, pumping out the box and having debris go back down the valve.

Tuesday, March 13th 2012, 11:21pm

by grey

For emptying valve boxes it should be fine but I wouldn't trust it to clean lines from debris. I'd rather flush.

Tuesday, March 13th 2012, 10:49am

by mrfixit

I'm glad this post reappeared. The sucktube has saved me a lot of time. The video I posted is a poor example of what it can do and how much water it can pump. I used it recently to remove the water out of a pipe that wouldn't stop draining while changing an anti-syphon valve. Every repair truck should have one and no Bill Painter isn't paying me to say this. :thumbup:

Tuesday, March 13th 2012, 8:04am

by GatorGuy

RedHead,
can't speak for the Krick-it but many valve locators pulse the solenoid. You listen for the clicking sound.

Tuesday, January 10th 2012, 11:46am

by ReddHead

Stupid question probably, but how does the krick-it work? Does it make the solenoid pulse on and off?

Monday, January 9th 2012, 10:10pm

by mrfixit

I bought the Suck-Tube a while back. It's come in very handy on a few occasions. I'm definetly a faster repairman when it's needed. I used it on a manifold once cleaning out debris which I accidently let get in there without having to turn the main back on.

I had to use electrical tape to keep the large slip cap on at the top because the harder you pull the more sucking action you get. I crank on it at times. I didn't want to glue it incase I need to replace the seal inside.

Bill I noticed the picture on your site of the Suck-Tube isn't working for me.

www.youtube.com/watch?v=czEFJQ_r8cQ

Monday, January 9th 2012, 9:08pm

by Bill Painter

Burying vs. valve box?

As was mentioned a bit earlier, use a box!
Keep a couple inches of soil on top of the lid for grass to grow, and use one big enuff to get your paws into it for changing the diaphragm(s).
Now get yourself a Krik-It audio locator ('scuse the shameless plug!!) and you'll always find your valves within minutes of firing the clock.....
Bill

Wednesday, August 10th 2011, 9:12am

by ReddHead

Also, makes it a bit harder to manually turn them on for testing.