You are not logged in.

  • Login
  • Register

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2251 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, March 26th 2007, 7:35am

by Admin

The SRR-Kit is a very good choice. Please see the following forum topic for details on how well it worked even in a basement application:
http://www.sprinklertalk.com/forum/topic.asp?TOPIC_ID=1866

Monday, July 3rd 2006, 5:39am

by Wet_Boots

It will work with limitations. The remote connector cord between controller and receiver plug must be short, to eliminate interference problems. Any masonry or metal between transmitter and receiver will reduce the effective range.

Monday, July 3rd 2006, 4:54am

by Maxamus1975

Remote Control

Hey all first post.[8D]

I have a Hunter ICC (not sure which one) with a smart port installed. I’m looking to buy a cheap remote control for it. I was looking at the SRR-KIT remote control system. Will this work? If so, is installation easy? Thanks in advance for any help given.

Tony
Jackson NJ