You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4594 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, May 17th 2006, 10:50am

by jlease

Not sure what you mean by dwell time and not sure why you wait 15 minutes between zones, but my first guess would be to check the start times you have in each program. (controller has, I think, 4 start times for each program (A B C)). Hunter's help line is 877-865-2578.

Thursday, May 11th 2006, 2:13am

by spenik

Hunter Pro C controller

I have set up the controller with 4 zones. Set the run time for 30 minutes and dwell time for 30 minutes with a 15 minute delay between each zone. The controller activates when it is suppose to but continues to cycle untill I manually turn it off. Once I return it to run mode it doesn't activate untill the next time it is suppose to by then continues to cycle again. Any suggestions.