You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2825 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Thursday, September 23rd 2010, 1:49am

by mrfixit

Loosen the screw that holds the nozzle in. Lift the sprinkler with the adjustment tool. Hold it up with one hand and pry the old nozzle out. I use a small screwdriver. Careful to not damage the sprinkler. The adjustment tool can also pull the nozzle out.

They used to give away a tool that held the sprinkler up while you changed the nozzle. I think there was 1 per case. I never actually tried it. You can still get one but you'll have to shop around. It's on this page. Nozzle insertion

I prefer the red nozzles.

Wednesday, September 22nd 2010, 2:46pm

by mackie29

Hunter PGP Nozzle Replacment

I want to change out a couple of nozzles what is the easiest way to keep the head up so you can get the nozzle out and are the blue nozzles better then the red ones.