You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3194 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Wednesday, September 15th 2010, 5:16pm

by Central Irrigation

That's why I install heads that come preassembled with check valves. It eliminates low head drainage and keeps all lines full of water (which greatly reduces the spitting of air you are referring to). Not to mention, it is a great water saving feature. Just think about all that water that just drains away! And if you're paying for it....WHOA!

Not sure what brand of head you have, but replacing the lowest head on the zone would help. Generally a head with a check valve will hold back the water up to 10-12 ft of vertical rise above the head.

Wednesday, September 15th 2010, 12:48pm

by Wet_Boots

If there are banging noises when a zone is first opened, that is something other than water hammer. Eliminating head drainage might help. You have to try it to be sure.

Wednesday, September 15th 2010, 12:29pm

by MSidoti

Thank you. Would you suggest to just let the lower lateral lines & heads drain and not worry about it? Would the fact that the lateral lines empty out contribute to the hammering? Thanks

Wednesday, September 15th 2010, 11:12am

by Wet_Boots

It's okay for sprinklers to spit air, even if it isn't aesthetically pleasing.

Wednesday, September 15th 2010, 9:26am

by MSidoti

Repair low head drainage? Hammering. Spitting air.

Hi, Need some advice please.
Had a new 10 zone Rain Bird system installed 2 weeks ago and we're just starting to use it.
1st issue is hammering. 5-10 seconds of pipes hammering when the first 5-6 zones come on/off.
2nd issue is low head draining. Installer didn't seem overly concerned about it and said the property slope will result in the lower heads draining.

When the zones come on they spit air for a minute or so before full water flow.
Is that normal-shouldn't the lines be pressurized and full of water for the most part?
Are all these issues all related?
Should I replace all heads heads with those that have check valves if these do not.
Thanks for any help.