You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1814 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Sunday, August 2nd 2009, 8:59am

by worachj

My preference is to use nozzles that throw more water so you don’t need to water as long. Do you really want to run a zone for 1 hour to put down .22 inches of water? Do you want all eight heads to run for 1 hour? If your system has five zones that’s five hours of run time. More zones give you more control of wet/dry spots.

Do you have heads that throw at different degrees? Remember for even water distribution you want the GPM’s of the heads to reflect the radius and degree of the head. For example, if you have all heads of a zone throwing 30 feet radius you would want nozzles with GPM’s to match the degree being used.
90 degree at 2.00 GPM
180 degree at 4.00 GPM
360 degree at 8.00 GPM

I would stick to 4-5 heads per zone; it will give you more control and better options.

Saturday, August 1st 2009, 8:42pm

by WORM

Number of heads per zone based on gpm and psi

Looking at the charts, with 35 psi using 1.5 nozzle I will have a spray radius of 34'. The flow rate is 1.35 gpm with a precipitation rate of .22 in/h. Using the 1.5 nozzle with 5 heads I would only be using 6.75gpm. That is half of what my gpm flow rate is. Do you think 5 heads per zone still be the way to go. Also I am planning to use poly pipe it looks like 11/4" has a lot less friction loss would you use 1 1/4" or stick to 1". Thanks for the help

Friday, July 31st 2009, 6:11pm

by worachj

You really need to look at nozzle performance charts to determine how many heads you can have per zone. If you have static psi of 50 at your house, you won’t be getting that at the heads; more likely closer to 30-35 psi, I would stick to 4-5 heads per zone. Look at the nozzle performance charts and add up the GPM’s to determine how many heads per zone you can use, and design to the lower limits of your design to leave room for error.

http://www.rainbird.com/landscape/products/rotors/5000.htm

Friday, July 31st 2009, 3:16pm

by WORM

Number of heads per zone based on gpm and psi

I am wanting to know how many heads would be optimal to use based on gpm and psi. My psi is about 50 and 16 gpm. I am considering using rainbird 5000 series rotors. My design is for 30' spacing for head to head coverage. MY Rainbird design calls for 8-10 rotors per zone but, talking to local landscapers they use only 4-5 rotor heads per zone. What do you think. Thanks