You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4842 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Tuesday, July 19th 2005, 8:48am

by RidgeRun05

Nope, it won't hurt the valves at all or burn anything up. You can, like Wetboots said, just shut the system off at the controller. But either way is fine.

Monday, July 18th 2005, 5:50pm

by Wet_Boots

All the same, it wouldn't hurt to learn how to turn off the sprinkler system at the controller.

Monday, July 18th 2005, 5:17pm

by Tom


Monday, July 18th 2005, 5:07pm

by dad_of_four

Running valves when water isd shut-off

My pressure regulator FEBCO 825Y is currently leaking out the discharge area. I have turned off the inlet valve until repairs can be made.

In the meantime, will I be causing harm if the automatic spriklek system starts its cycle, and there is no water in the system? Will I burn-out the solenoid valve?