You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2330 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Saturday, July 28th 2012, 3:40pm

by briank (Guest)

rain dial repair has some helpful tips on testing the transformer and other troubleshooting tips; you can check it out here:

Saturday, May 21st 2005, 3:46am

by Wet_Boots

Label the wires. Get a VOM at Radio Shack, or borrow one, and measure resistance between the wires. Make a chart of all the combinations. One wire, and one wire only, should have a similar resistance to the others. That one wire will be the common. The others will be individual zones.

Friday, May 20th 2005, 6:14pm

by TheCure250

Rain Dial installation

I recently moved into a rental home and found the sprinkler controller had been removed by the previous tenant. All the wiring is exactly the same (red) and very heavy gauge. My landlord has no idea on how to fix, but will reduce my rent if I can. Can anyone tell me how to fix? Is there a way to fix? [V]