You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2208 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Tuesday, August 5th 2008, 1:57pm

by Wet_Boots

There are battery-powered valves (and battery-powered solenoid adapters) ~ You don't have a wireless network commanded from some central controller, you have individual (or grouped, depending on layout) controllers running the valves. All this technology costs money, and if the wire wasn't getting so expensive, you would probably want to take another look at installing control wiring. In terms of operating reliability, you should consider the conventional wiring.

Tuesday, August 5th 2008, 1:29pm

by Big Dog

Last time I checked into it no one made a remote valve above 1", I had a 1 1/2 rainbird system and supply house told me that it wouldn't work

Monday, May 5th 2008, 3:23am

by mark2030

Manual to remote control

Not sure if this is the right section to post this questoin in.... We have 4.5 acres on 10 zones operated by manual ball type valves. We would like to up-grade the system to a remote-control, wireless system. I was looking at the Irritrol valves and the Irritrol IBOC 300 valve mounted controllers with the Irritrol PCP8-Plus remote control programmer. I have 2" pvc and am on well water. What 2" Irritrol valves will work with the IBOC 300 controls? And/Or is there a better way/product out there to accomplish this? Our valves stations are split up into three different loctions on the property, so digging up the yard to lay wires isn't an option.

Thanks in advance for any help with this.

Mark