You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2402 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Tuesday, May 20th 2008, 9:35am

by drpete

Dont worry about a 90 being close to the pump.

I cant think of any reasons why you would need a backflow devise for doing what you are doing (pumping out of a canal). But make suer the water is getting filteredso debris is nt plugging up your heads.

Monday, May 19th 2008, 2:37pm

by yourchef51

Thanks for the quick reply.

1) I thought I read somewhere that it was not good to have a 90 turn close to the beginning of the pump line and that's how the system was designed.

2) I am pumping out of a canal sort of like a lake/river.

Thank you

Monday, May 19th 2008, 12:58pm

by drpete

1. short answer no but why do you ask/why are you concerned?



2.are you pumping out of a lake/river?

Monday, May 19th 2008, 11:58am

by yourchef51

Couple of Pump Questions

I am about to install a sprinkler system that will be fed by a 1 hp? pump. I had toro design my system for me. I have a couple of questions though:

1) I am having PVC come off the pump to the control valve and is there a certain length that this should go before it turns if at all.

2) Do I need a back flow device for the pump or anything between the pumps and the valves?

Thanks for your help